Info: 'This routine will recover files that have been deleted from a volume. Only complete files are recovered. If a file has been partially overwritten you should use one of the routines that does not rely on tags to recover your data.'
DITL_107.txt
Items: (2 entries)
0:
Bounds: x1=35, y1=68, x2=245, y2=100
Type: -120
Info: 'To cancel command, hold down the key and type period (.).'
1:
Bounds: x1=35, y1=15, x2=245, y2=65
Type: -128
Info: ''
DITL_106.txt
Items: (3 entries)
0:
Bounds: x1=40, y1=135, x2=110, y2=155
Type: 4
Info: 'OK'
1:
Bounds: x1=175, y1=135, x2=245, y2=155
Type: 4
Info: 'Cancel'
2:
Bounds: x1=15, y1=10, x2=290, y2=130
Type: -120
Info: 'This routine will recreate the volume information table and the volume allocation map. It uses the sector tag bytes only and does not require information from the disk directory. Files not in the disk directory will be reentered.'
DITL_105.txt
Items: (3 entries)
0:
Bounds: x1=32, y1=95, x2=245, y2=130
Type: -120
Info: 'To cancel command, hold down the key and type period (.).'
1:
Bounds: x1=32, y1=15, x2=245, y2=70
Type: -128
Info: ''
2:
Bounds: x1=32, y1=70, x2=245, y2=90
Type: -128
Info: ''
DITL_104.txt
Items: (3 entries)
0:
Bounds: x1=40, y1=110, x2=110, y2=130
Type: 4
Info: 'OK'
1:
Bounds: x1=175, y1=110, x2=245, y2=130
Type: 4
Info: 'Cancel'
2:
Bounds: x1=15, y1=10, x2=290, y2=70
Type: -120
Info: 'This routine will examine every sector of every file on the volume and will correct any invalid tag fields found.'
DITL_103.txt
Items: (24 entries)
0:
Bounds: x1=20, y1=210, x2=90, y2=230
Type: 4
Info: 'OK'
1:
Bounds: x1=100, y1=210, x2=170, y2=230
Type: 4
Info: 'Cancel'
2:
Bounds: x1=10, y1=10, x2=300, y2=28
Type: -120
Info: 'There are ^0 buffers available'
3:
Bounds: x1=10, y1=30, x2=375, y2=48
Type: -120
Info: 'Output file is: ^1'
4:
Bounds: x1=50, y1=58, x2=112, y2=76
Type: -120
Info: 'Write to:'
5:
Bounds: x1=30, y1=80, x2=119, y2=98
Type: 6
Info: 'Data Fork'
6:
Bounds: x1=30, y1=100, x2=146, y2=118
Type: 6
Info: 'Resource Fork'
7:
Bounds: x1=10, y1=56, x2=170, y2=122
Type: -128
Info: ''
8:
Bounds: x1=226, y1=58, x2=326, y2=76
Type: -120
Info: 'Write data to:'
9:
Bounds: x1=206, y1=80, x2=308, y2=98
Type: 6
Info: 'Start of File'
10:
Bounds: x1=206, y1=100, x2=350, y2=118
Type: 6
Info: 'Logical end of file'
11:
Bounds: x1=206, y1=120, x2=356, y2=138
Type: 6
Info: 'Physical end of file'
12:
Bounds: x1=190, y1=56, x2=365, y2=142
Type: -128
Info: ''
13:
Bounds: x1=40, y1=128, x2=124, y2=146
Type: -120
Info: 'Write from:'
14:
Bounds: x1=14, y1=152, x2=86, y2=170
Type: -120
Info: 'Character'
15:
Bounds: x1=92, y1=152, x2=157, y2=170
Type: -112
Info: ''
16:
Bounds: x1=18, y1=181, x2=86, y2=199
Type: -120
Info: 'in Buffer'
17:
Bounds: x1=92, y1=178, x2=157, y2=196
Type: -112
Info: ''
18:
Bounds: x1=10, y1=126, x2=169, y2=204
Type: -128
Info: ''
19:
Bounds: x1=238, y1=154, x2=316, y2=172
Type: -120
Info: 'Write Size:'
20:
Bounds: x1=204, y1=188, x2=269, y2=206
Type: -112
Info: ''
21:
Bounds: x1=280, y1=176, x2=352, y2=194
Type: 6
Info: 'Sectors'
22:
Bounds: x1=280, y1=196, x2=345, y2=216
Type: 6
Info: 'Bytes'
23:
Bounds: x1=190, y1=152, x2=365, y2=221
Type: -128
Info: ''
DITL_102.txt
Items: (9 entries)
0:
Bounds: x1=55, y1=150, x2=120, y2=170
Type: 4
Info: 'OK'
1:
Bounds: x1=175, y1=150, x2=240, y2=170
Type: 4
Info: 'Cancel'
2:
Bounds: x1=58, y1=50, x2=192, y2=68
Type: -120
Info: 'Starting disk sector'
3:
Bounds: x1=200, y1=50, x2=260, y2=68
Type: -112
Info: ''
4:
Bounds: x1=58, y1=81, x2=192, y2=99
Type: -120
Info: 'First buffer number'
5:
Bounds: x1=200, y1=80, x2=260, y2=98
Type: -112
Info: ''
6:
Bounds: x1=10, y1=110, x2=192, y2=128
Type: -120
Info: 'Number of sectors to write'
7:
Bounds: x1=200, y1=110, x2=260, y2=128
Type: -112
Info: ''
8:
Bounds: x1=10, y1=10, x2=270, y2=30
Type: -120
Info: 'There are ^0 buffers available'
DITL_101.txt
Items: (9 entries)
0:
Bounds: x1=55, y1=150, x2=120, y2=170
Type: 4
Info: 'OK'
1:
Bounds: x1=175, y1=150, x2=240, y2=170
Type: 4
Info: 'Cancel'
2:
Bounds: x1=48, y1=50, x2=190, y2=68
Type: -120
Info: 'Starting ^1 sector'
3:
Bounds: x1=200, y1=50, x2=260, y2=68
Type: -112
Info: ''
4:
Bounds: x1=55, y1=80, x2=189, y2=98
Type: -120
Info: 'First buffer number'
5:
Bounds: x1=200, y1=80, x2=260, y2=98
Type: -112
Info: ''
6:
Bounds: x1=10, y1=110, x2=190, y2=128
Type: -120
Info: 'Number of sectors to read'
7:
Bounds: x1=200, y1=110, x2=260, y2=128
Type: -112
Info: ''
8:
Bounds: x1=10, y1=10, x2=270, y2=28
Type: -120
Info: 'There are ^0 buffers available'
DITL_100.txt
Items: (5 entries)
0:
Bounds: x1=73, y1=85, x2=138, y2=105
Type: 4
Info: 'OK'
1:
Bounds: x1=215, y1=85, x2=280, y2=105
Type: 4
Info: 'Cancel'
2:
Bounds: x1=10, y1=8, x2=350, y2=28
Type: -120
Info: 'There are ^1 buffers numbered from 0 to ^0'
3:
Bounds: x1=50, y1=50, x2=220, y2=70
Type: -120
Info: 'Enter buffer to display'
4:
Bounds: x1=225, y1=50, x2=290, y2=68
Type: -112
Info: ''
DITL_63.txt
Items: (4 entries)
0:
Bounds: x1=190, y1=80, x2=260, y2=100
Type: 4
Info: 'Rename'
1:
Bounds: x1=60, y1=80, x2=130, y2=100
Type: 4
Info: 'Cancel'
2:
Bounds: x1=10, y1=10, x2=140, y2=30
Type: -120
Info: 'New name for file:'
3:
Bounds: x1=10, y1=40, x2=300, y2=56
Type: -112
Info: ''
DITL_62.txt
Items: (6 entries)
0:
Bounds: x1=58, y1=132, x2=134, y2=152
Type: 4
Info: 'Set EOF'
1:
Bounds: x1=210, y1=132, x2=286, y2=152
Type: 4
Info: 'Cancel'
2:
Bounds: x1=30, y1=12, x2=334, y2=32
Type: -120
Info: 'You may set the logical end of file to:'
3:
Bounds: x1=46, y1=44, x2=334, y2=64
Type: 6
Info: 'Zero (creating an empty file)'
4:
Bounds: x1=46, y1=68, x2=334, y2=88
Type: 6
Info: 'Position indicated by marked character'
5:
Bounds: x1=46, y1=92, x2=334, y2=112
Type: 6
Info: 'Equal to physical end of file'
DITL_61.txt
Items: (29 entries)
0:
Bounds: x1=325, y1=230, x2=385, y2=250
Type: 4
Info: 'OK'
1:
Bounds: x1=325, y1=255, x2=385, y2=275
Type: 4
Info: 'Cancel'
2:
Bounds: x1=20, y1=6, x2=366, y2=24
Type: -120
Info: 'Select cursor for use in Ascii display mode:'
3:
Bounds: x1=46, y1=28, x2=366, y2=46
Type: -128
Info: ''
4:
Bounds: x1=46, y1=48, x2=86, y2=66
Type: 6
Info: ''
5:
Bounds: x1=102, y1=48, x2=142, y2=66
Type: 6
Info: ''
6:
Bounds: x1=158, y1=48, x2=198, y2=66
Type: 6
Info: ''
7:
Bounds: x1=214, y1=48, x2=254, y2=66
Type: 6
Info: ''
8:
Bounds: x1=270, y1=48, x2=310, y2=66
Type: 6
Info: ''
9:
Bounds: x1=326, y1=48, x2=366, y2=66
Type: 6
Info: ''
10:
Bounds: x1=20, y1=74, x2=366, y2=92
Type: -120
Info: 'Select cursor for use in Hexadecimal display mode:'
11:
Bounds: x1=46, y1=96, x2=366, y2=114
Type: -128
Info: ''
12:
Bounds: x1=46, y1=116, x2=86, y2=134
Type: 6
Info: ''
13:
Bounds: x1=102, y1=116, x2=142, y2=134
Type: 6
Info: ''
14:
Bounds: x1=158, y1=116, x2=198, y2=134
Type: 6
Info: ''
15:
Bounds: x1=214, y1=116, x2=254, y2=134
Type: 6
Info: ''
16:
Bounds: x1=270, y1=116, x2=310, y2=134
Type: 6
Info: ''
17:
Bounds: x1=326, y1=116, x2=366, y2=134
Type: 6
Info: ''
18:
Bounds: x1=20, y1=141, x2=170, y2=159
Type: -120
Info: 'Default display mode:'
19:
Bounds: x1=172, y1=140, x2=278, y2=158
Type: 6
Info: 'Hexadecimal'
20:
Bounds: x1=282, y1=140, x2=338, y2=158
Type: 6
Info: 'Ascii'
21:
Bounds: x1=20, y1=163, x2=128, y2=181
Type: -120
Info: 'Translate Table:'
22:
Bounds: x1=132, y1=162, x2=210, y2=180
Type: 6
Info: 'Standard'
23:
Bounds: x1=214, y1=162, x2=296, y2=180
Type: 6
Info: 'Expanded'
24:
Bounds: x1=300, y1=162, x2=370, y2=180
Type: 6
Info: 'Custom'
25:
Bounds: x1=20, y1=184, x2=340, y2=202
Type: 5
Info: 'Do not request confirmation of disk updates'
Info: 'Available at better computer stores, or send $40 in U.S. funds (plus sales tax if California resident) to:'
8:
Bounds: x1=50, y1=188, x2=278, y2=240
Type: -120
Info: 'MacMaster Systems939 E. El Camino Real, Suite 122Sunnyvale, California 94087'
DITL_41.txt
Items: (3 entries)
0:
Bounds: x1=116, y1=50, x2=186, y2=70
Type: 4
Info: 'OK'
1:
Bounds: x1=1116, y1=40, x2=1186, y2=60
Type: 4
Info: 'Invisible'
2:
Bounds: x1=20, y1=10, x2=292, y2=48
Type: -120
Info: '^0 Sectors have been ^2 starting at buffer ^1.'
DITL_40.txt
Items: (4 entries)
0:
Bounds: x1=60, y1=94, x2=140, y2=114
Type: 4
Info: 'OK'
1:
Bounds: x1=1160, y1=94, x2=1240, y2=114
Type: 4
Info: 'Invisible'
2:
Bounds: x1=190, y1=94, x2=270, y2=114
Type: 4
Info: 'Cancel'
3:
Bounds: x1=20, y1=10, x2=310, y2=84
Type: -120
Info: 'If you change the display buffer you will not be able to undo the changes you have made in this buffer.'
DITL_31.txt
Items: (3 entries)
0:
Bounds: x1=110, y1=40, x2=180, y2=60
Type: 4
Info: 'Go Ahead'
1:
Bounds: x1=20, y1=40, x2=90, y2=60
Type: 4
Info: 'Cancel'
2:
Bounds: x1=50, y1=10, x2=145, y2=30
Type: -120
Info: 'Are you sure?'
DITL_30.txt
Items: (3 entries)
0:
Bounds: x1=130, y1=75, x2=200, y2=95
Type: 4
Info: 'OK'
1:
Bounds: x1=1130, y1=75, x2=1200, y2=95
Type: 4
Info: 'Cancel'
2:
Bounds: x1=20, y1=10, x2=310, y2=64
Type: -120
Info: '^0'
DITL_29.txt
Items: (3 entries)
0:
Bounds: x1=60, y1=94, x2=140, y2=114
Type: 4
Info: 'OK'
1:
Bounds: x1=190, y1=94, x2=270, y2=114
Type: 4
Info: 'Cancel'
2:
Bounds: x1=20, y1=10, x2=310, y2=90
Type: -120
Info: 'This command will replace sectors 0 and 1 of the current volume with a new copy of the standard boot procedures.'
DITL_28.txt
Items: (3 entries)
0:
Bounds: x1=60, y1=90, x2=140, y2=110
Type: 4
Info: 'OK'
1:
Bounds: x1=170, y1=90, x2=270, y2=110
Type: 4
Info: 'Cancel'
2:
Bounds: x1=20, y1=24, x2=310, y2=84
Type: -120
Info: 'This command will reverse the data fork and resource fork pointers in the disk directory entry for this file.'
DITL_27.txt
Items: (4 entries)
0:
Bounds: x1=50, y1=140, x2=150, y2=160
Type: 4
Info: 'Continue'
1:
Bounds: x1=180, y1=140, x2=280, y2=160
Type: 4
Info: 'Cancel'
2:
Bounds: x1=20, y1=25, x2=52, y2=57
Type: -96
Info: ' '
3:
Bounds: x1=70, y1=22, x2=310, y2=125
Type: -120
Info: 'Because of the error that occurred when this disk was mounted, it is possible that this routine will give invalid results or cause a program failure. Do you wish to continue?'
DITL_26.txt
Items: (5 entries)
0:
Bounds: x1=240, y1=165, x2=310, y2=185
Type: 4
Info: 'Mount'
1:
Bounds: x1=70, y1=165, x2=140, y2=185
Type: 4
Info: 'Eject'
2:
Bounds: x1=25, y1=12, x2=360, y2=28
Type: -120
Info: 'Disk Error: ^1'
3:
Bounds: x1=25, y1=34, x2=360, y2=70
Type: -120
Info: '^0'
4:
Bounds: x1=25, y1=74, x2=360, y2=154
Type: -120
Info: 'The above error occurred while attempting to mount the diskette in the ^2 drive. You may eject the diskette or mount it anyway.'
DITL_25.txt
Items: (6 entries)
0:
Bounds: x1=200, y1=100, x2=280, y2=120
Type: 4
Info: 'OK'
1:
Bounds: x1=1200, y1=100, x2=1280, y2=120
Type: 4
Info: 'Invisible'
2:
Bounds: x1=20, y1=8, x2=52, y2=40
Type: -96
Info: ' '
3:
Bounds: x1=70, y1=10, x2=310, y2=28
Type: -120
Info: 'Disk Error: ^1'
4:
Bounds: x1=70, y1=30, x2=310, y2=48
Type: -120
Info: 'Disk Sector: ^2'
5:
Bounds: x1=70, y1=50, x2=310, y2=95
Type: -120
Info: '^0'
DITL_24.txt
Items: (4 entries)
0:
Bounds: x1=190, y1=96, x2=270, y2=116
Type: 4
Info: 'OK'
1:
Bounds: x1=1190, y1=96, x2=1270, y2=116
Type: 4
Info: 'Invisible'
2:
Bounds: x1=20, y1=22, x2=52, y2=54
Type: -96
Info: ' '
3:
Bounds: x1=70, y1=18, x2=310, y2=84
Type: -120
Info: 'There are only ^0 sectors on this volume.'
DITL_23.txt
Items: (4 entries)
0:
Bounds: x1=190, y1=96, x2=270, y2=116
Type: 4
Info: 'OK'
1:
Bounds: x1=1190, y1=96, x2=1270, y2=116
Type: 4
Info: 'Invisible'
2:
Bounds: x1=20, y1=22, x2=52, y2=54
Type: -96
Info: ' '
3:
Bounds: x1=70, y1=18, x2=310, y2=84
Type: -120
Info: 'There are only ^0 sectors in this fork of the file.'
DITL_22.txt
Items: (4 entries)
0:
Bounds: x1=60, y1=96, x2=140, y2=116
Type: 4
Info: 'Cancel'
1:
Bounds: x1=190, y1=96, x2=270, y2=116
Type: 4
Info: 'OK'
2:
Bounds: x1=20, y1=22, x2=52, y2=54
Type: -96
Info: ' '
3:
Bounds: x1=70, y1=25, x2=310, y2=84
Type: -120
Info: 'Are you sure you want to write this sector to disk?'
DITL_21.txt
Items: (4 entries)
0:
Bounds: x1=40, y1=90, x2=140, y2=110
Type: 4
Info: 'Keep Changes'
1:
Bounds: x1=160, y1=90, x2=280, y2=110
Type: 4
Info: 'Discard Changes'
2:
Bounds: x1=20, y1=30, x2=52, y2=62
Type: -96
Info: ' '
3:
Bounds: x1=70, y1=23, x2=310, y2=84
Type: -120
Info: 'Do you really want to discard the changes that you have made to this sector?'